drills

steam powered oil drill

 

Drills! You want them? We have them! All kinds of drills and drill information just for you. We've found all the best information about steam powered oil drill and gathered it together in one spot.


DC5KITA 18v 5 Tool Combo Kit

Power tools for Less at Cornerhardware.com

More Links for steam powered oil drill

nail drill
free basketball drills
cordless drill
cordless drill ratings
metric drill bits
marine corps silent drill team
speed drills
drill team steps
drill press table tops
magnetic drills
tap drill
linebacker drills
swimming drill
dayton drill press
lacrosse drills
free football drills
mls soccer training drills
hitachi cordless drill
dremel drill press
baseball throwing drills
quickfoot ladder drills
tile drill bits
outfield drills
basketball dribbling drills
dentist drill
seed drills
carbide drills
pitching drills
drill press parts
cordless drill batteries
fire drill evacuation
core drill
drill steel
youth basketball drills
dry land stick handling drills
carlton radial drill
electronic circuits for drill control
milwaukee drills
victory drill book
hockey practice drills
portable rock drills
keyboarding drills
portable drill guide
walker turner drill press parts
baseball practice drills
soccer passing drills
drill sergeant cadences

 


steam powered oil drill

 

 

  • Ghost Story - Investigating The Old Agnews Hospital
    Author: Gloria Young
    Unsuspecting commuters and distant travelers pass by a neglected old Lafayette Street landmark, not realizing that within its massive exterior dwells something from the other side of reality...something that makes one's skin tingle and envelopes one's body creating labored breathing and sweaty pores.

    Just the sight of this immense structure during daylight will evoke a feeling of apprehension and viewing this structure after sundown will evoke a much stronger apprehension. The whole area looks dilapidated and in disarray. The paint is peeling and flaking off its walls, windows are boarded up, withered vegetation clings to rough edges around the structure as if in a death grip.We were introduced to the property's caretaker. He and his wife speak of mysterious happenings in and around this old structure after sundown. The caretaker points to the bushes outside this old convalescent hospital, stating that they will react strangely as people pass by. The wife is in fear for her baby, and because of this she says she keeps a loaded gun near her at all times.No one has spent the night inside this old structure since it closed down almost five years ago.We decided to investigate this old convalescent home and attempt to determine if there really was anything going on that would cause such fear in people.We arrived at the old hospital a little after 6 p.m. and met with a handful of workers who were taking some of the fixtures out. The building was destined to be demolished in about two weeks. The workers continued working until 8 p.m.

    During the time that they are still there, we wandered throughout the dusty hallways and climbed up and down the creaky stairs to get a feel for where everything was and became familiar with the floor plan. When the sun went down, there would be no lights and someone could trip over something or worse, get lost in the maze of rooms there are in this building. Even in daylight, this building has an unusual way of making you feel on edge. It is almost too much for me as I walk slowly past the open doorways to the rooms in the convalescent hospital.I tried to imagine what it must have been like when old people walked these halls or were taken to the various areas of the hospital. We walked into a bathroom and I noticed that the tubs are now caked with dirt and dust from years of neglect. Dirty stains encircle the tubs and toilets and the mirrors are fogged.We all feel pretty safe with our flashlights and equipment and the workers not too far away. Sounds of drills and saws fill the air but soon they ceased. The workers left and we were alone in this building.Slowly we made our way back to the front of the building and took a look up the stairs one last time before the workers were all gone for good.

    The workers leave and wish us luck. Someone tells us that no one has ever been able to stay in this building for a few hours let alone overnight. We tell them we were here to investigate and why. Why is it that no one can stay here? We wanted to find out why things were happening in this building. We might not get another chance.

    We decided to start on the first floor and work our way up to the third floor. We decided to stay together. Even though we had walkie-talkies and everyone was buddied with another, we decided it would be safer to be together. We were unsure about the stability of the floors or the building.The sun had gone down but faint light filtered through the windows. The rooms were getting dimmer and dimmer until it got totally dark. Although there were streetlights and the safety of the street was not far away, I felt very apprehensive at that point.

    We started to make our way through the first floor. There were boxes and barrels and construction equipment all over the floor and we had to watch our step as we made our way through room after room. If not for our footsteps on the floor and an occasional clicking of cameras or changing of tapes, the whole building would have been deathly quiet. We reached the end of the first floor. We had taken a lot of readings and a lot of pictures for documentation. By my watch it was 10 p.m. We started to make our way to the second floor. We began to settle in to our tasks and joked a bit. In the middle of a joke, someone said to no one in particular - do you hear that? We stopped in our tracks about halfway up the stairs. Suddenly, arms go up and recorders are turned on. We wait breathlessly. There it is again. It is faint, but audible. So faint though, I don't think our recorders can pick it up. A lady is calling someone. The voice, small, yet quiet...young sounding. "Come here". Pause. "Come here". Four out of five in our group heard it. It was coming from above us. Don't know where. Don't know from whom. We had not yet reached the landing of the second floor. A member of our group stopped suddenly. He was feeling a tingling moving slowly up his legs. We stopped and waited to see what would happen. Suddenly, there were clicking sounds. The type of clicking sounds that happen when someone would "flick their Bic". They happened in no regular pattern...3, 4, 5, 6 times. They stopped and then another voice...faint, strained -- "nurse". Pause. "Nurse". An old man calling out, his voice strained as though he could barely talk. We all were standing still, motionless. Our eyes were all fixed on the landing in the darkness ahead of us. These sounds were coming from up there, apparently from outside a room or in the darkened hallway. They had an echo quality to them.Then they were gone. As soon as the sounds came, they were gone and then dead silence. We were definitely aware of everything going on around us. Our senses were extremely heightened. We waited for what seemed like hours. It was probably only about 15 minutes. We all decided to go on. We got to the second story landing and looked to the left down the long hall...nothing - and to the right and there is nothing. Nothing moving, nobody breathing and darkness for as far as the eyes could see. We heard sounds, which we attributed to the building.
    We opted for the left side first. We walked halfway down the hall and heard a few noises, we all stopped dead in our tracks. It was nothing. The creaks and groans of an old building. We walked all the way to the end without anything further happening.We just started to make our way down the right side of the hallway. This floor had to have about 28 rooms on this floor, 14 to the left and 14 to the right. All the rooms were various sizes from small patient rooms to larger, perhaps office-type rooms. Some had bathrooms, some didn't. As we approached what was maybe the third room on this right side of the hallway, one investigator went into a room and immediately came back out and told us of a cold spot. We had two more people go in with him and the rest stayed in the hall. In this area, the hair on the back of my neck stood up, the girl next to me told me she was getting really cold and then we looked across the hall to see and hear the remnants of a door slam shut. The people in the room came out quickly and asked what that was. We told them the door behind us just slammed shut. They said it was really cold in that room and that they felt like they were being watched. We switched places with them and indeed the room was cold, very cold. We all took readings and pictures and video. After a few more minutes of waiting we decided that since there was nothing further in the hall or in that room we would continue on. We completed that floor and ascended to the third floor. There was nothing up there. It was as quiet as the first floor. There was just a bunch of old rooms with boxes and papers and dirt all around. We decided to make our way down to the first floor.As we passed through the second floor, two people decided to detour into the cold room we were in earlier and discovered it was no longer cold. The door that had slammed shut earlier was now open again. As we descended the second floor, one person told us to stop and we did. You could tell she was straining to hear something, even turning her head toward whatever she was listening to. The rest of us didn't hear anything. She said she couldn't make out what it was but she heard a faint voice.We all went home that night knowing that this was the last time we would be able to go through this old convalescent hospital because in two weeks the building would be gone for good. They were going to put up a Sun Microsystems campus on that very spot. We wondered what would become of the people left behind...the old man calling out for his nurse, the woman calling out for someone to 'come here' and the other things that were happening on that floor. We checked and double-checked our readings, pictures and video from that evening. We did catch pictures of orbs and although we feel we did catch EVP from one room that night, it is very, very difficult to hear. Our thoughts still wander to that night and wonder if those people are now wandering the halls of Sun Microsystems. We felt that this was one of those places that we would have loved to go into again and to research it differently. We feel very lucky to have had that opportunity and one day we will contact Sun Microsystems and see what is happening on the second floor these days.

    About the Author

    Gloria Young has been a ghost hunter and paranormal investigator for over 10 years. She has dedicated her life to researching paranormal activity. She has written, "Faces of a Ghost Hunter" as well as three other books. She founded the paranormal research group, "Ghost Trackers". She has co-produced two documentaries on ghost hunting. (www.ghost-trackers.org)

    ...

    steam powered oil drill

  •  

    More sites that feature steam powered oil drill

    1. A Short History of GPO
    ... the Ink Room where lampblack and oil were mixed and clean ink ... cylinder presses, all steam powered, moving with great ... G. Hours were set aside for drill and instruction; and GPO was ...
    http://www.access.gpo.gov ...story/macgilvray.html


    2. Welcome to Cabin Fever!
    ... Flat Belt Driven Brass Pump Cabbage Chopper Sm. Drill Presses 6 Oil/water tanks 5 Sm. & 1 Lg. Brass ... ... Electric Powered with oil field replica engine Pumps Oil Small Bench Lathe Small Steam Governor ...
    http://www.cabinfeverexpo ...o/IFE2004_auction.htm


    3. Construction Equipment, Power Plants, Compressor Stations, Pipelines, Plant ...
    ... Valero Refinery oil and gas structural ... helped to improve steam generation. Wastewater ... for completing 14 drill crossings totaling 19 ... included jacking 800 powered emergency generator ...
    http://www.idswater.com/w ...284_0/g_supplier.html


    4. battery powered desk lamp
    ... an amazingly low ... and the steam bending is powered by the ... Lance Cookie Jars, Aladdin Oil Lamp w/ original boxes ... collect 'my' Ryobi battery powered drill. Mitre 10 had 14.4 ...
    http://lamp.deskszone.com/batterypowereddesklamp/


    5. Austin Bay Blog » UPDATED: A trillion barrels of oil?
    ... some of the tar to make the steam they save on CO2 emissions ... we are approaching peak oil. The oil in ANWR is not all that easy to ... and it is very expensive to drill due to permafrost, etc. We ...
    http://www.austinbay.net/blog/?p=597


    6. Energy Venture Fair VI - Participating Companies
    ... plans to purchase existing fields and drill discrete low-risk bypassed reserves missed by earlier imaging methods. In Focus target geographic area, 70% of the oil in place has been bypassed within a ...
    http://www.energyventuref ...ipatingcompanies.html


    7. Industries Served by Kalsi Engineering
    ... Petrochemical To produce oil & gas and supply the ... rotary seal designs for drill bits, downhole ... of electric motor-powered worm gear actuators ... feedwater pump steam turbine by ...
    http://www.kalsi.com/Industry.htm


    8. Neehaw.com - Find stuff from Amazon - Browse Tools
    ... and time-consuming. Powered by a 12 amp electric ... Kit with 6337 MForce Drill and Fluorescent Work ... of maintenance--it's oil-free and Teflon-coated ... This powerful home steam vacuum saves you the ...
    http://www.neehaw.com/tools/top-468240-1.html


    9. Smith's Maple Products and Sugar Tree Farms -- About Us
    ... to the sap, they would steam off the water so that ... couple of men with gas powered drills about 3 weeks ... of the season to drill holes in the trees for ... the process they use an oil fired evaporator to ...
    http://www.smithsmapleproducts.com/sap.html


    10. http://www.conexpoconagg.com/expoexchange/usercontent.asp?ID=96&EventKey=1
    ... Training & International Powered Access Federation) Axim ... Dynaset Oy Dyno Nobel Inc. E Z Drill E Z Road, Inc. E.D. Etnyre & ... Worldwide Express Kirloskar Oil Engines Kismet Industries KL ...


    11. Patents 5516874 - 5517130
    ... 17 alpha-position substituted) Patent 5516923: Extracting oil from oil bearing plant parts (ORGANIC COMPOUNDS -- PART OF THE CLASS 532-570 SERIES : : Fatty compounds having an acid moiety which ...
    http://www.everypatent.com/idx/pdir1461.html


    12. Drive cooler makers all claim to be the best; Multiport Driveshowers can pro...
    ... half of the drive housing or steam generated off the transom area ... the same time made certain the oil level was correct. We then ... we used a 9 volt cord less drill when performing this ...
    http://www.driveshowers.com/reviews.htm


    13. RANKS, PROFESSIONS, OCCUPATIONS AND TRADES
    ... as baize). BEAD PIERCER A person employed to drill the holes in beads. BEADLE An officer of the ... ... made rolled iron plate used to make boilers for steam engines etc. BOILERMAKER A craftsman who worked ...
    http://www.gendocs.demon.co.uk/trades.html


    14. Timeline Technology
    ... Mar 27, Joseph Couch patented a steam-powered percussion rock drill. (MC, 3/27/02) 1849 Apr 10 ... ... upset a lamp containing turpentine and oil on his filthy clothing and saw a cleaning effect ...
    http://www.timelines.ws/subjects/Technology.HTML


    15. R/C Manufacturers and Suppliers
    ... City - Carbide tools, drill bits, end mills ... bushing oil, bearing oil, comm drops, etc. Dave ... Gas and electric powered R/C paragliders ... Shearwater Boats - Live steam and electric tugboats ...
    http://www.towerhobbies.com/rcwcommercial.html


    16. Canola: A Quality Brassica Oilseed
    ... trains of the time were steam-powered, and with the European and Asian rape oil supplies cut off ... ... system. The small round seeds necessitated seed drill adjustments to uniformly sow only a few pounds ...
    http://www.hort.purdue.ed ...dings1990/V1-211.html


    17. The Oil Drum | A Community Discussion about Peak Oil
    ... Previous | Skip Next Powered by RingSurf Buy Your ... the "political will" to drill more. I see that the ... efficient; if we burned oil to make electricity to ... and a 33%-efficient steam-turbine bottoming ...
    http://www.theoildrum.com .../2005/11/3/155552/585


    18. Global Manufacture Categories
    ... Genermex for the supply of a steam-gas power plant to Monterrey ... Gigahertz tunable oscillators powered by its micron-scale ... Oct-15-2004 Mexico wants to sell oil, steel, cement to China Mexico ...
    http://www.globalmanufact ...ory.cfm?categoryID=10


    19. British 'Firsts'
    ... mechanized seed drill, initiated the ... underground railway, powered by steam. 1863 Thomas ... invented the Parsons steam turbine in 1884, a ... The world's first oil tanker was produced ...
    http://www.fatbadgers.co.uk/Britain/firsts.htm


    20. Crowsnest Highway
    ... River, climbing to round Goat Mountain and steam onward toward Midway. With the C&W complete ... ... high of 18ยข per pound by officers of the Standard Oil Company fixing prices through Amalgamated Copper ...
    http://www.crowsnest-high ...e.pl?city=GRAND_FORKS


    21. Wires - A girl, a toolkit, Iraq
    ... Wanting a go on someones big drill / grinder / power tool. So I ... myself home. Back to my steam powered laptop, put to shame by ... burnt out wrecks of trucks and oil containers (relieved of the ...
    http://www.blogjam.com/wires/


    22. Boiler - Vertical Boiler
    ... Steam Plant Steam Power Steam Powered Steam Press Steam Pressure ... Furnace Waste Heat Boiler Waste Oil Boiler Water Boiler Water ... steam products Steam and hot water boilers for drill rig ...
    http://www.atozboilers.com/verticalboiler/


    23. Trolleys and Interurbans -- Chapter Six of The New World
    ... with every wheel powered could handle much ... future cars because our steam engine could not ... could be swung out to drill post holes. When not ... high), and there was no oil pressure or gas tank ...
    http://www.kenkifer.com/newworld/06troll.htm


    24. Products
    ... 2940 Engine Air and Oil Filters, Strainers, and ... Filters 44 Furnace, Steam Plant, and Drying ... 48 Valves 4810 Valves, Powered 4820 Valves ... Power Driven 5133 Drill Bits, Counterbores ...
    http://www.bpconsort.com/html/products.html


    25. BEL AIR VOLUNTEER FIRE COMPANY
    ... OFFICER BIOS WEEKLY DRILL SCHEDULE STATISTICS ... and high powered sirens eventually ... smoke inhalation and steam burns from feverishly ... by a ruptured fuel oil tank in the back room ...
    http://www.bavfc.org/history.htm


    26. Machinery Market Research Reports - Heavy Industry Industry Analysis
    ... 2011 World Outlook for Steam and Hot Water Heating ... and Attachments for Oil Burners Topics ... Bearings and Battery-Powered Types Topics ... Hammers without Drill Chuck Excluding ...
    http://www.marketresearch ...h/machinery/1108.html


    27. Earthquake Gas Powered Earth Auger
    ... fifty ... s first steam-powered oil rigs, Mentry dug ... and ... us to it like a jet-powered steam roller and so ... http ... plumbing auger gas powered auger auger drill bit ... http://www ...
    http://www.variableearth. ...s+Powered+Earth+Auger


    28. Home Improvement - Shop for quality products at Overstock prices!
    ... top to bottom with this Steam Vac Deluxe carpet ... 18 volt cordless drill goes anywhere you can ... on this large-capacity, oil-free, no-maintenance ... Tool Cordless Kit > Powered by a rechargeable 12 ...
    http://www.a1bargainshop.com/Home-Improvement.html


    29. Space Resources
    ... 162.25 seconds, the kerosene- and liquid-oxygen-powered engine ran out of fuel and shut down without ... ... and storage depots and even solar-thermal steam rockets could enable a wide variety of new ...
    http://www.gerlachspace.com/resources/


    30. Telegraphed Dispatch July
    ... during its final days was powered by a 2-10-0 Decapod that ... Project: Locomotive No. 23 The "steam team" restoration efforts ... testers, magnetic based drill presses, rigging, air hammers ...
    http://www.esrm.com/esrm/ ...ispatch/2000_jul.html


    31. Jazz Dancer
    Everything you need to know about jazz dancing including reviews, costumes, schools, lessons, tips, and publications.
    http://www.jazzdancer.info

    32. Ballroom Splendor
    A site for the ballroom dancing enthusiast. Find information about the latest moves and instructors. Find the best places to see ballroom dancing competitions and dance yourself.
    http://www.BallroomSplendor.info

     

     

    Privacy Policy
    copyright 2005 onlydrills.com