drills

mill drill

 

Drills! You want them? We have them! All kinds of drills and drill information just for you. We've found all the best information about mill drill and gathered it together in one spot.


DC5KITA 18v 5 Tool Combo Kit

Power tools for Less at Cornerhardware.com

More Links for mill drill

drill your own well
cordless drill ratings
t-post rock drill
youth tackle football drills
cordless drill replacement batteries
drill pump
nut driver drill 15mm
ingersol rand drill
goalie drills
mag drills
large drill bits
tip drill video
black and decker macho hammer drill bit
drill sergeant
free youth football drills
drills for youth football
keyboarding drills
milwaukee power-plus 1/2 hammer drill
radial arm drill
volleyball passing drills
drill bit chart
dry land stick handling drills
golf drills
basketball fast break drills
bible drill games
softball practice drills
paper drill
conditioning drills
for sale cme 75 auger rig drill
lacrosse tips and drills
dewalt cordless drills
core drill
fire drill evacuation
craftsman drill presses
portable rock drills
forstner drill bit
drill grinding
keyless drill chuck
steam powered oil drill
combined drills
dual drill
drill bit design
baseball drills
womentip drills

 


mill drill

 

 

  • Ghost Story - Investigating The Old Agnews Hospital
    Author: Gloria Young
    Unsuspecting commuters and distant travelers pass by a neglected old Lafayette Street landmark, not realizing that within its massive exterior dwells something from the other side of reality...something that makes one's skin tingle and envelopes one's body creating labored breathing and sweaty pores.

    Just the sight of this immense structure during daylight will evoke a feeling of apprehension and viewing this structure after sundown will evoke a much stronger apprehension. The whole area looks dilapidated and in disarray. The paint is peeling and flaking off its walls, windows are boarded up, withered vegetation clings to rough edges around the structure as if in a death grip.We were introduced to the property's caretaker. He and his wife speak of mysterious happenings in and around this old structure after sundown. The caretaker points to the bushes outside this old convalescent hospital, stating that they will react strangely as people pass by. The wife is in fear for her baby, and because of this she says she keeps a loaded gun near her at all times.No one has spent the night inside this old structure since it closed down almost five years ago.We decided to investigate this old convalescent home and attempt to determine if there really was anything going on that would cause such fear in people.We arrived at the old hospital a little after 6 p.m. and met with a handful of workers who were taking some of the fixtures out. The building was destined to be demolished in about two weeks. The workers continued working until 8 p.m.

    During the time that they are still there, we wandered throughout the dusty hallways and climbed up and down the creaky stairs to get a feel for where everything was and became familiar with the floor plan. When the sun went down, there would be no lights and someone could trip over something or worse, get lost in the maze of rooms there are in this building. Even in daylight, this building has an unusual way of making you feel on edge. It is almost too much for me as I walk slowly past the open doorways to the rooms in the convalescent hospital.I tried to imagine what it must have been like when old people walked these halls or were taken to the various areas of the hospital. We walked into a bathroom and I noticed that the tubs are now caked with dirt and dust from years of neglect. Dirty stains encircle the tubs and toilets and the mirrors are fogged.We all feel pretty safe with our flashlights and equipment and the workers not too far away. Sounds of drills and saws fill the air but soon they ceased. The workers left and we were alone in this building.Slowly we made our way back to the front of the building and took a look up the stairs one last time before the workers were all gone for good.

    The workers leave and wish us luck. Someone tells us that no one has ever been able to stay in this building for a few hours let alone overnight. We tell them we were here to investigate and why. Why is it that no one can stay here? We wanted to find out why things were happening in this building. We might not get another chance.

    We decided to start on the first floor and work our way up to the third floor. We decided to stay together. Even though we had walkie-talkies and everyone was buddied with another, we decided it would be safer to be together. We were unsure about the stability of the floors or the building.The sun had gone down but faint light filtered through the windows. The rooms were getting dimmer and dimmer until it got totally dark. Although there were streetlights and the safety of the street was not far away, I felt very apprehensive at that point.

    We started to make our way through the first floor. There were boxes and barrels and construction equipment all over the floor and we had to watch our step as we made our way through room after room. If not for our footsteps on the floor and an occasional clicking of cameras or changing of tapes, the whole building would have been deathly quiet. We reached the end of the first floor. We had taken a lot of readings and a lot of pictures for documentation. By my watch it was 10 p.m. We started to make our way to the second floor. We began to settle in to our tasks and joked a bit. In the middle of a joke, someone said to no one in particular - do you hear that? We stopped in our tracks about halfway up the stairs. Suddenly, arms go up and recorders are turned on. We wait breathlessly. There it is again. It is faint, but audible. So faint though, I don't think our recorders can pick it up. A lady is calling someone. The voice, small, yet quiet...young sounding. "Come here". Pause. "Come here". Four out of five in our group heard it. It was coming from above us. Don't know where. Don't know from whom. We had not yet reached the landing of the second floor. A member of our group stopped suddenly. He was feeling a tingling moving slowly up his legs. We stopped and waited to see what would happen. Suddenly, there were clicking sounds. The type of clicking sounds that happen when someone would "flick their Bic". They happened in no regular pattern...3, 4, 5, 6 times. They stopped and then another voice...faint, strained -- "nurse". Pause. "Nurse". An old man calling out, his voice strained as though he could barely talk. We all were standing still, motionless. Our eyes were all fixed on the landing in the darkness ahead of us. These sounds were coming from up there, apparently from outside a room or in the darkened hallway. They had an echo quality to them.Then they were gone. As soon as the sounds came, they were gone and then dead silence. We were definitely aware of everything going on around us. Our senses were extremely heightened. We waited for what seemed like hours. It was probably only about 15 minutes. We all decided to go on. We got to the second story landing and looked to the left down the long hall...nothing - and to the right and there is nothing. Nothing moving, nobody breathing and darkness for as far as the eyes could see. We heard sounds, which we attributed to the building.
    We opted for the left side first. We walked halfway down the hall and heard a few noises, we all stopped dead in our tracks. It was nothing. The creaks and groans of an old building. We walked all the way to the end without anything further happening.We just started to make our way down the right side of the hallway. This floor had to have about 28 rooms on this floor, 14 to the left and 14 to the right. All the rooms were various sizes from small patient rooms to larger, perhaps office-type rooms. Some had bathrooms, some didn't. As we approached what was maybe the third room on this right side of the hallway, one investigator went into a room and immediately came back out and told us of a cold spot. We had two more people go in with him and the rest stayed in the hall. In this area, the hair on the back of my neck stood up, the girl next to me told me she was getting really cold and then we looked across the hall to see and hear the remnants of a door slam shut. The people in the room came out quickly and asked what that was. We told them the door behind us just slammed shut. They said it was really cold in that room and that they felt like they were being watched. We switched places with them and indeed the room was cold, very cold. We all took readings and pictures and video. After a few more minutes of waiting we decided that since there was nothing further in the hall or in that room we would continue on. We completed that floor and ascended to the third floor. There was nothing up there. It was as quiet as the first floor. There was just a bunch of old rooms with boxes and papers and dirt all around. We decided to make our way down to the first floor.As we passed through the second floor, two people decided to detour into the cold room we were in earlier and discovered it was no longer cold. The door that had slammed shut earlier was now open again. As we descended the second floor, one person told us to stop and we did. You could tell she was straining to hear something, even turning her head toward whatever she was listening to. The rest of us didn't hear anything. She said she couldn't make out what it was but she heard a faint voice.We all went home that night knowing that this was the last time we would be able to go through this old convalescent hospital because in two weeks the building would be gone for good. They were going to put up a Sun Microsystems campus on that very spot. We wondered what would become of the people left behind...the old man calling out for his nurse, the woman calling out for someone to 'come here' and the other things that were happening on that floor. We checked and double-checked our readings, pictures and video from that evening. We did catch pictures of orbs and although we feel we did catch EVP from one room that night, it is very, very difficult to hear. Our thoughts still wander to that night and wonder if those people are now wandering the halls of Sun Microsystems. We felt that this was one of those places that we would have loved to go into again and to research it differently. We feel very lucky to have had that opportunity and one day we will contact Sun Microsystems and see what is happening on the second floor these days.

    About the Author

    Gloria Young has been a ghost hunter and paranormal investigator for over 10 years. She has dedicated her life to researching paranormal activity. She has written, "Faces of a Ghost Hunter" as well as three other books. She founded the paranormal research group, "Ghost Trackers". She has co-produced two documentaries on ghost hunting. (www.ghost-trackers.org)

    ...

    mill drill

  •  

    More sites that feature mill drill

    1. HobbyCNC.com
    ... CAD! Router, Mill, Drill, and Engrave on Your Desktop! PCB Milling Too! Connects To The Computers Printer Port! Uses Inexpensive Stepper Motors and Controller Board With Easy to Use Software! 60oz-in ...
    http://www.hobbycnc.com/plans/plans.htm


    2. Chronos Ltd Milling Machines
    ... 15.00 - FOR TELESALES CONTACT 01582 471900 Items Ordered:, Cart Value: Quick search Chronos Catalogue:Milling Machines CLARKE CMD10 MICRO MILL DRILL(Reference #CMD10.) This high precision mill/drill ...
    http://www.chronos.ltd.uk ...ling_Machines_33.html


    3. http://www.strictlyic.com/ser01.htm
    ... A Lathe and Mill attachment or a mill/drill milling machine are necessary. No casting are required. A beginnerís exercise. Issues: # 71, 72......$6.50ea Issues: # 73 & 74.....$6.25ea.....TOTAL: $25 ...


    4. Brake lathe, craftsman 12 inch lathe, 15 harrison l lathe model, goodway lat...
    ... metal lathe monarch lathe part cnc colchester lathe used bennett lathe vertical webster drill in lathe,Mill one lathe tool holder california in lathe manual sale craftsman 12 inch lathe canada cnc ...
    http://brake-lathe.uumed.com/


    5. Businesses
    ... MACHINING CENTER DAEWOO ACE-H100 2 PALLET HORIZONTAL MACHINING CENTER DAEWOO PUMA 230MSA MILL/DRILL TURNING CENTER W/ SUB-SPINDLE DAEWOO PUMA 300 MSB MILL/DRILL TURNING CENTER W/ SUB-SPINDLE ...
    http://www.theinternetpros.com/portfolio.htm


    6. Mini Lathe
    ... MILL DRILL LATHE $34.68 - Nov-15 2:04 PM 5 pc SMALL MINI LATHE 1/4" C2 CARBIDE BIT Tooling NEW $8 ... ... 29.95 - Nov-15 2:35 PM STAINLESS ALLEN BOLTS/NUTS/WASHERS CNC DRILL LATHE MILL $17.33 Nov-15 4:30 PM ...
    http://mini-lathe.pennyworm.com/


    7. Metal lathe, lathe metal pic, wood lathe chuck, for sale atlas lathe
    ... wood working mini lathe south bend lathe works bench top lathe warner and swasey turret lathe mill drill lathe combo,Brake disc lathe machine cnc large lathe swing used lathe mori seiki used used ...
    http://metal-lathe.uumed.com/


    8. Metal Fabrication and Welding Lake Elsinore CA Atlas Products
    ... W., Plasma Machine Shop:Lathe, Mill, Drill-Press, C/N/C, Water Jet, Laser Sheet metal:Shear, Brake, Punch, Power Roll Forming, Ornamental Iron:Gates, Fences, Hand Rails Structural Steel:New Structures ...
    http://www.atlasproductsinc.com/


    9. Camtronics, inc. -- CNC with Dan Mauch
    ... In my shop I have CNC controls on my full size milling machine, a 13X25 metal cutting lathe, a mill/drill, 2 printed circuit drill machines, A desktop Sherline milling machine, a small vertical mill ...
    http://s120220635.onlinehome.us/cnc-explained.asp


    10. http://www.surplusmachines.com/BROTHER_404.htm
    BROTHER MODEL TC-22A ITEM #404 PURCHASED NEW 1999 CONTROL: CNC-A00 APPROX. RUN HOURS: 7,637 PRICE ...


    11. EFormance Engineering
    ... We have a 15x40 gear head engine lathe, a Shizuoka CNC mill, 18" metal cutting bandsaw, Rong-Fu Mill/Drill with DRO, Allen emissions analyzer, Eagle 9000 pound 2 post lift with low clearance arms ...
    http://www.eformance.com/


    12. CNC Jr. Retrofit Kit for RF-31 Mill/Drill
    ... Jr. Retrofit Kit Retrofit your own Enco Mill-DrillÆ, JetÆ, AcraÆ RF-31, GrizzlyÆ G3358, G1007, and any other copy of the Rong Fu 31 Mill-Drill with our complete CNC Kit for the low price of $4,248.00 ...
    http://www.cncmasters.com ...rill Retrofit Kit.htm


    13. MilldrillLathe Product Listing - Hardware-Reviews.org
    Hardware-Reviews.org Industrial Strength Reviews for Hardware and Tools | home | | FAQ | tell a ...
    http://www.hardware-revie ...ldrillLathe_Page1.htm


    14. Metal Working - Shop Essentials
    ... 01 SOUTH BEND Lathe,Mill,Drill Press Part,MANUALS IN STORE $12.50 ATLAS_CRAFTSMAN Lathe,Mill,Drill Press MANUALS IN STORE $17.50 3M Imperial Diamond Lapping Film 0.5 Mic $14.95 MAKE ENGLISH WHEEL FOR ...
    http://www.4equipment.net ...Shop-Essentials.shtml


    15. Industrial Auctions In Ontario Canada Review - Online news and more relevant...
    ... Developing Thought Mill Drill Lathe Growth Trust Ind.. Used Pfaff Indus.. Industrial Unint.. Siemens Industri.. Managing Innovat.. All Rights Reseved Search News and Reviews about Industrial Auctions ...
    http://www.willsart.com/t ...n-ontario-canada.html


    16. Capabilities
    ... Modern Model 1340 engine lathe with 13" swing and 40" between centers MSC 20" variable speed mill/drill machine with R-8 spindle Mobile 2-ton gantry hoist Enco 7" x 12" horizontal/vertical bandsaw ...
    http://www.benthic-telesi ...ges/Capabilities.html


    17. Drill To Cnc Products
    ... Nokia 3200 Driver Plate Roxy Driver Que 24x10x40x Dry Cleaners Secret Dub Subwoofer Grills HOW TO CONVERT YOUR MILL DRILL TO CNC $39.97 $5.00 $2.50 © Copyright 2004 All Rights Reserved Discovermusic
    http://www.discover-music.com/drilltocnc.html


    18. The designer of
    The designer of SHOPTASK TMpresents SHOPMASTER Eldorado TM BRIDGEMILLTM A NEW MACHINE FOR A NEW ...
    http://www.shoptask.com/


    19. ►►►coleman drill - compare prices, reviews and buy at comp...
    ... cordless drill core drill drill doctor drill press generator coleman 5500 hilti drill hitachi drill mill drill Home | Privacy Statement | Terms of Use Copyright © 2005 compare-coleman-prices All ...
    http://www.compare-colema ...man-drill/search.html


    20. Current Inventory ~ High Technology Machines
    ... 20 3D Layout Machine X-8000mm, Y-4000mm (2,000mm per column) R G Mupex 150 1998 6 Axis Extrusion Mill, 4 Spindles (2 Mill & 2 Drill) Mill/Drill Extrusion For Clip, Stiffner, Hinge, etc. SHW Unispeed ...
    http://www.hightechmachines.com/inv.asp


    21. June 26, 2005
    ... Bale buncher Steel stone boat Allied sprayer 4 wheel trailer 500 gallon poly water tank Fanning mill Drill fills Recreation and Yard: 1985 Honda Big Red ATC 250, electric start, new tires and front ...
    http://www.ukrainetzauction.com/2005-06-26.htm


    22. Turning - Intrepid Machine, Inc. - Intrepid is a machine shop located in Tam...
    ... 75 to 4.200 rpm Turret holds 12 tools Daewoo Puma 2500 SY 6-Axis High Performance Turning Center Cross Mill-Drill and C-axis sub-spindle to allow completion of complex parts in one operation. Turning ...
    http://www.intrepidmachine.com/turning.php


    23. Auxiliary Table for Mill or Mill/Drill Page 3
    AUXILIARY TABLE for MILL/DRILL Etc Pg 3 From end to end it's pretty darn parallel, going good so far. Just finished a full face cut, hand feeding slowly from one end to the other took quite some time ...
    http://members.optusnet.c ...dstuff/AuxTable3.html


    24. ComputerSculpture.com—External Links Page
    ... CNC Mills CNC JuniorA cnc-converted mill-drill package with powerful 650 oz/in motors, now available at a discount price at ComputerSculpture.com MicroprotoThe new site for Taig CNC mills and lathes ...
    http://www.computersculpt ...ages/Index_Links.html


    25. MEC
    ... Lathe,mill,drill... Tissue converting machinery Cement Plant Equipment Power Transmisson Equipment Railway Tools ICE CREAM STICKS Pulp Paper Plant Construction Material Commodities Co-generation for ...
    http://www.mec.com.cn/


    26. Hobby lathe, craftsman 12 inch lathe, cnc lathe mill, cnc colchester lathe used
    ... lathe amco wood turning mini lathe brake by lathe rels used cnc lathe machine mill used welders mill drill lathe grizzly mini lathe how to operate a wood lathe cnc lathe used vertical lathe chuck ...
    http://hobby-lathe.ourmed.org.uk/


    27. hpcworld - Drill Mill
    ... h p c w o r l d PRODUCT INFORMATION KEY MACHINES Drill Mill Portable Drill-Operated Key Duplicator ... ... S.Patent# 6,033,164 The HPC Drill Mill (DM-500) quickly duplicates keys with the power of your drill ...
    http://www.hpcworld.com/KeyMachines/dm500.htm


    28. Locate the Manufacturing Jobs in Indiana that you are searching for at Thing...
    ... Minimum of 3 years experience in pipe fitting, jig, fixtures, mill, drill, turn and welding. (2nd shift) Monday through T ... View this Indiana Manufacturing Job - Posting Date Tuesday, October 18 ...
    http://manufacturing.thin ...Browse-Jobs/Indiana/0


    29. CNC PRO - Yeager Automation
    Post Your Job Shop here BH,MachineShop Brief Description: laythe,mill,drill,taped Specialty: prototype Contact Name: bao hung City: carrollton State: texas Country: dallas Phone: 469 892 0719 ...
    http://www.yeagerautomati ...ory/job_shop.pl?id=39


    30. HOME IMPROVEMENT : Tools : Metalworking: Mill Drill : DIY Network
    ... Wrenches & Pliers Other Utility Room Walls & Ceilings Windows SPONSOR LINKS Metalworking: Mill Drill From "DIY Tools & Techniques" episode DIT-212 Figure A Figure B Figure C Guest Rick Navone ...
    http://www.diyhelp.com/di ...13936_2955947,00.html


    31. Jazz Dancer
    Everything you need to know about jazz dancing including reviews, costumes, schools, lessons, tips, and publications.
    http://www.jazzdancer.info

    32. Ballroom Splendor
    A site for the ballroom dancing enthusiast. Find information about the latest moves and instructors. Find the best places to see ballroom dancing competitions and dance yourself.
    http://www.BallroomSplendor.info

     

     

    Privacy Policy
    copyright 2005 onlydrills.com